Contributed by Peter Obel (source) This is a guide to integrate SmartThings devices with Zipabox, if you replace the part about SmartThings and adjust part…
Contributed by Peter Obel (source) This is a guide to integrate SmartThings devices with Zipabox, if you replace the part about SmartThings and adjust part…
Zigbee scene controller Reported as not compatible with the ZipaBox – found during inclusion but results in an error “Device Cannot Be Added.”
This glitch affects certain ZipaTiles and is believed to be cause by faulty displays, however, OTA upgrades are known to solve 95% of the cases.…
This is an extract from this Zipato Forum post There are no limitations to camera support on the Zipato platform. If the device has HTTP…
Ikea Trådfri bulbs are reported to work directly from Zipatile They can be added to Zipabox with the Zigbee Module and included in rules. The…
Please follow the discussion on this Zipato forum thread
Virtual Thermostat (VT) is a nice piece of software that contains the logic to act as an intelligent thermostat for your home heating and/or cooling. …
What is a Cluster? A Cluster is a virtual Zipato Controller, that will reside on your Controllers, in a way over the top of your…
Alot of users have connected the Zipatiles inbuilt relays 1 and 2 a light circuit. Removing the need for a Z-wave on/off module, these relays…
ZipaTile cannot be used as a secondary controller, contrary to what Sebastian noted in this SmartThings post. The only way to access sensor readings from…