Dear Friends, Effective immediately, I’m suspending all access to this Wiki. All existing content will remain accessible, but new user registrations are no longer possible.…
Dear Friends, Effective immediately, I’m suspending all access to this Wiki. All existing content will remain accessible, but new user registrations are no longer possible.…
Contributed by Peter Obel (source) This is a guide to integrate SmartThings devices with Zipabox, if you replace the part about SmartThings and adjust part…
Zigbee scene controller Reported as not compatible with the ZipaBox – found during inclusion but results in an error “Device Cannot Be Added.”
This glitch affects certain ZipaTiles and is believed to be cause by faulty displays, however, OTA upgrades are known to solve 95% of the cases.…
This is an extract from this Zipato Forum post There are no limitations to camera support on the Zipato platform. If the device has HTTP…
Please follow the discussion on this Zipato forum thread
Ikea Trådfri bulbs are reported to work directly from Zipatile They can be added to Zipabox with the Zigbee Module and included in rules. The…
ZipaTile cannot be used as a secondary controller, contrary to what Sebastian noted in this SmartThings post. The only way to access sensor readings from…
To calibrate Zipatile’s internal temperature sensor: 1. Login to my.zipato.com 2. Navigate to: Device Manager -> IP -> Internal -> Temperature Sensor 3. Change the…
Zipatile firmware 1.2.29m 1. Follow inclusion instructions at https://www.youtube.com/watch?v=uaU0tXXSSgg 2. Controls show up but thermostat control not possible. Zipato support confirmed this is due to current…