Zipatile firmware 1.2.29m
- Make sure the thermostat is powered via C-wire or it will not broadcast temperature/humidity values.
- Setpoint does not work with virtual thermostat
- Temperature reported by the multilevel sensor shows up in F
- Otherwise fully operational.
- CT100 Plus UserGuide PDF
Zipatile firmware 1.2.29m
Cannot get temperature/humidity values. Sensors show up as generic multilevel sensors but no values are nulled. I’ve put in a ticket with Zipato. Otherwise fully operational.
Updated: when powered via C-Wire, temp/hum values are properly reported. See post for updated content.